Do you know the difference between a homogenizer, a mixer and an emulsifier?

1. The rotating stator of the chemical machine is generally made of high-strength cemented carbide, similar to two grinding discs for shearing motion, which is relatively wear-resistant, and the chemical effect can be achieved by adjusting the gap.

The advantage is that the mixing effect is good, the selection of the appropriate chemical head can be applied to a variety of working conditions, the application is wide, and it is suitable for a variety of different industries;

The disadvantage is that the output is low, and the mixing effect is poor for hard particle materials and high viscosity materials.

2. High-pressure homogenizer: it is mainly used for mixing two liquid substances, but it is not suitable for mixing solid and liquid substances. Because most of the homogenizers are of the plunger type, the solid particles will wear the plunger, and the particles will be stuck at the one-way valve, which will reduce the homogenization effect. The advantage is that the mixing effect is good; the disadvantage is that the power consumption is large, the output is low, it is prone to failure, and the maintenance cost is high.

3. The high-speed mixer is mainly used for simple mixing. For example, the particles of the material itself do not need to be refined, just simple mixing;

The advantage is that the traditional stirring method has large output and wide application;