Troubleshooting method of sealing machine

The automatic tail sealing machine is a tail sealing machine specially designed to seal plastic hoses, composite pipes and aluminum-plastic pipes. It is a sealing method of heating and shaping at the same time. It is mainly used in chemical, pharmaceutical, daily chemical, food and special industries that are relatively satisfactory sealing equipment, such as toothpaste sealing machine, facial cleanser sealing machine, ointment sealing machine tailing machine, cosmetic sealing machine, etc. There are some common fault conditions that are more common.

1. The more common seals are unstable and very easy to open. There are two key factors: the temperature is too low or the heat sealing time is short. We can properly adjust some temperatures or lengthen the heat sealing time; Second, there is material at the seal, and the specific location of the seal should be wiped clean.

2. The seal is damaged or partially damaged. The main reason is that the temperature is too high or the high temperature tape is damaged. We can reduce the temperature, or shorten the heat sealing time, remove and replace the high temperature cloth, etc.

3. The printing on the seal is unclear or uneven, the standard air pressure is too high, the low temperature is too low, and the upper and lower gaps of the heating soup head or the cooling shaping head are inconsistent. You can increase the pressure, adjust the temperature, and adjust the specific position of the gap between the soup head or the refrigeration setting head.

Sanhuai Machinery is a large-scale end-sealing machine manufacturer, specializing in the production of various end-sealing machines.