Safety precautions for liquid filling machine operation

Safety precautions for liquid filling machine operation: The liquid filling machine must be installed, operated, and maintained by dedicated personnel. Before installation, operation, maintenance, and inspection, please carefully read the operation manual for correct use. Before installing, operating, inspecting, and maintaining the equipment, one should be proficient in the relevant equipment situation, safety information, and precautions.

Safety precautions for liquid filling machine operation:

(1) Before starting up the liquid filling machine, check the grounding wire of the equipment, check for any air leaks in the moving pipeline, and check for any ruptured air pipes;

(2) Clean the filling machine equipment well, keep the surface of the filling machine clean, often remove the accumulated material on the scale body, and pay attention to the cleanliness inside the electric control cabinet;

(3) Replace the lubricating oil for the motor every year, check the tightness of the chain, and adjust the tension in a timely manner;

(4) During production, it is necessary to frequently inspect and observe the filling machinery components to see if rolling, lifting, and loosening of screws are normal;

(5) The sensor of the liquid filling machine is a high-precision, high sealing, and high sensitivity equipment. It is prohibited to collide or overload, and must not be touched during operation. Disassembly is strictly prohibited unless for maintenance needs;

(6) If the liquid filling machine is not in use for a long time, it is necessary to empty the material in the pipeline and clean the pipeline with clean water through self circulation.